Intergrain - Natural Stain

Product Description

Intergrain NaturalStain is a high performance, semi-transparent, water based stain designed to transform the colour of exterior timber. NaturalStain delivers a wide range of timber colour options to cater for individual designs or to give Treated Pine the appearance of another timber species. NaturalStain is extremely durable and withstands wear on timber decking without the need for a top-coat.

NaturalStain contains unique Hydroguard technologyˆ which adds significant protection to guard timber against Australia's harsh conditions as well as the abrasive effects of foot traffic. The advanced finish resists stain absorption and dirt and dust adhesion, helping timber stay clean. The result is timber that stays protected and looking fresh for significantly longer than traditional decking stains.

NaturalStain is fast drying, enabling two coats to be applied in one day.

Being water based, NaturalStain emits significantly less VOC’s (volatile organic compounds) into the atmosphere than traditional oil based timber finishes. This makes NaturalStain safer to use, and much gentler on the environment.

Note: The colour, species, age and condition of the timber to be stained will impact the final colour and finish of all semi-transparent stains. Because of this, the colours shown on NaturalStain colour chips and swatches are to be viewed as a close representation of the colour that can be achieved. NaturalStain colour names may not match other products with the same colour name. Always test on a small area or off-cut for colour suitability before use.

 

  • Where to use: Ideal to transform the colour of any exterior timber including extreme exposures and high traffic areas. Also suitable for use on HardiePlank™, similar cement based substrates, and some composites. NaturalStain can be overcoated with Intergrain UltraClear™ Exterior* for a gloss or a satin finish. For inside/outside timber colour matching, NaturalStain is appropriate for use on interior exposed beams, window frames and skirting boards and can be overcoated with Intergrain UltraClear Interior for a gloss or satin finish. Note: UltraClear is not suitable for coating areas subject to foot traffic. NaturalStain can also be used on interior flooring, and is ideal for achieving a continuous flow between interior floor and exterior decking. When used on interior flooring NaturalStain must be overcoated with Intergrain UltraFloor™ Gloss or Satin.
  • Coverage m2/L: 6
  • Number of coats: 2 to 3. If applying to new bare damp timber apply an additional coat.
  • Sanding time (optional): If necessary, sand lightly between coats to remove any raised grain
  • Recoat time: Minimum 2 hours
  • Dry time: Decking can be walked on with care after 24 hours. Full curing 7 days.
  • Clean up: Water
  •  

     

    Size
     
    View Colour Palette
    $19.95

    Related Products